ALERT DISASTER CONTROL

HISTORY

SERVICES

QHSE

PERSONNEL

RESOURCES

EQUIPMENT PROFILE

Well Control / Blowout Control / Capping / Snubbing Equipment

Item	Unit(s)	Description
01	01	FMC Type C- 29- SOL- FS Casing Head c/w 13 3/8" Slip On Lock Bottom Prep, Double 13 3/8" OD Casing 'FS' Packoff Seals, 13 3/8" 3000 PSI WP Flange Top, Two(2) 2 1/16" 3000 PSI WP Studded Side Outlets and Valve Removal Thread and Test Port.
	01	13 3/8" x 9 5/8" FMC Type C- 21 Slip Bowl Assembly
	01	FMC Model 120 Gate Valve c/w 2 1/16" 3000 PSI WP, Flanged Ends, Torque Buster Handle.
	01	2 1/16" 3000 PSI WP Blind Flange
	01	1/2" NPT Tapped Pipe Plug
	01	Companion Flange(2 1/16" 3000 PSI WP x 2" LP)
	01	Type B- 4 Bull Plug(2' LP x 4" Long)
	01	Angled Needle Valve(1/2" NPT M x F Type MFL)
	01	Pressure Gauge(0- 3000 PSI) c/w 4 1/2" Dial Face, 1/2" NPT M
	01	RX-57 Ring Gasket(13 3/8" 3000 PSI WP Flange)
	20	1 3/8" x 10 1/2" Stud and Two(2) Nuts(13 3/8" 3000 PSI WP Flange)
	03	RX- 24 Ring Gasket(2 1/16" 3000 PSI WP Flange)
	08	7/8" x 6 1/4" Stud and Two(2) Nuts(2 1/16" 3000 PSI WP Flange)
	02	'FS' Seals For 13 3/8" OD Casing
	01	Type c- 21 Seal Ring Assembly
02	01	FMC Type C- 22- FS Casing Spool Head Assembly c/w 13 5/8" 3000 PSI WP Flange Bottom With 'FS' Seals For 9 5/8" O D Casing Packoff, 11" 5000 PSI WP Flange Top, Two(2) 2 1/16" 5000 PSI WP Studded Side Outlets and Test Port.
	02	FMC Model 120 Gate Valve c/w 2 1/16" 5000 PSI WP, Flanged Ends, Torque Buster Handle, Nitrided Gate
	02	Companion Flange(2 1/16" 5000 PSI WP x 2" LP)
	02	Type B- 4 Bull Plug(2' LP x 4" Long)
	02	Angled Needle Valve(1/2" NPT M x F Type MFL)
	02	Pressure Gauge(0- 3000 PSI) c/w 4 1/2" Dial Face, 1/2" NPT M
	01	RX-57 Ring Gasket(13 5/8" 3000 PSI WP Flange)
	20	1 3/8" x 10 1/2" Stud and Two(2) Nuts(13 5/8" 3000 PSI WP Flange)
	04	RX- 24 Ring Gasket(2 1/16" 3000 PSI WP Flange)
	16	7/8" x 6 1/4" Stud and Two(2) Nuts(2 1/16" 3000 PSI WP Flange)
	01	RX- 54 Ring Gasket(11" 5000 PSI WP Flange)
	12	1 7/8" x 14" Stud and Two(2) Nuts(11" 5000 PSI WP Flange)
	08	RX- 54 Ring Gasket(11" 5000 PSI WP Flange For Riser Spool)
	48	1 7/8" x 14" Stud and Two(2) Nuts(11" 5000 PSI WP Flange For Riser Spool)
03	01	Crossover(4 1/2" IF Pin x 3 1/2" IF Box)
04	01	Test Plug Combination Tool Bowl Protector Running And Retrieving Tool (10" Nominal x 4 1/2" IF Box/Pin)
05	02	Hot Tap Units (10M – H2S Serviced)
06	01	Integrated ‘Hot Tap’ Saddle Clamp (10M – H2S Serviced) (2-3/8”, 2-7/8”, 3-1/2”, 4”, 4-1/2”, 5”, 5-1/2”)
07	01	9 5/8" 'Hot Tap' Saddle Clamp (10M – H2S Serviced)
08	01	13 3/8" 'Hot Tap' Saddle Clamp (10M – H2S Serviced)
09	02	Valve Drilling Units (10M – H2S Serviced)
10	02	Freeze Units c/w integrated pre-chillers, injection manifolds, pressure and temperature gauges, and recording unit.
11	04	11" 5000 PSI WP x 10 FT Riser Spools

«« Back